AEROSPACE AUTOMOBILE INDUSTRIAL MACHINE CONTROLS MACHINE RENOVATION SPARES SERVICE CALIBRATION TRAINING CONTACT US

TWIN STATION ROBOT WELDING CELL
TWIN STATION ROBOT MIG WELDING CELL
SCIAKY SPOT WELDING CELL
SCIAKY ROBOT TIG WELDING CELL
PRODUCTION CELLS
SCIAKY ROBOT WELDING CELL
SCIAKY M272 SPECIAL SEAM WELDING MACHINE
SEAM WELDERS
M272 MEDIUM FREQUENCY SEAM WELDING MACHINE
SPOTWELDERS
100KVA SCIAKY SPOTWELDER EQUIPPED FOR NUT WELDING

> SCIAKY SPOT WELDING CELL

Sciaky Spot-Weld-1

In this tool the four main components are clamped together prior to welding.
There is a large “U” pressing, a small “U” pressing and two side cheeks to connect them.
Eighteen welds join the four components together.
When the operator presses the start button, the door rises to shut, the clamps close, and the robot moves in to make its welds. When it has finished this cycle, the robot goes to its home position, the clamps open, and the door automatically opens.

Sciaky Spot-Weld-1

In this tool a reinforcer is welded into the previously welded main assembly.
The main assembly is located on pins and datums (as in the first tool) and the reinforcing channel is located and clamped using two hand on, air confirm, air off clamps.
The robot comes in and makes 16 welds.
The reinforcer obscures some of the welds from the previous operation, hence the need for two tools.
While this tool is being unloaded and reloaded with fresh components, the robot is welding on the other tool, and vice versa.
One operator can run both tools on two robot cells.